B800P NT problem

ALso is the same situation like http://www.mail-archive.com/[email protected]/msg239890.html

hello,I am afraid that NT mode with wcb4xxp might not be works greatly, it needs to patch! But mISDN works well with our card.

i] Last edited by Joe.Yung at 2010-5-14 10:14 [/i

Ok I was try mISDN v2 with lcr and :
I was
1.Set 1 (in lcr 0) channel to NT (of course I have set jumers on this channel to NT).
2.Set else channel to TE.
3,Connected cabel ISDN from first channel to any esle.
4.Start /etc/rc.mISDN start
5.lcr start
and I have some thing like this in lcradmin state:

─
Ext(port 0: hfc-8s.1-1) NT ptmp use:0 L1 unkn
Int(port 1: hfc-8s.1-2) TE ptmp use:0 L2 unkn L1 unkn
Int(port 2: hfc-8s.1-3) TE ptmp use:0 L2 unkn L1 unkn
Int(port 3: hfc-8s.1-4) TE ptmp use:0 L2 unkn L1 unkn
Int(port 4: hfc-8s.1-5) TE ptmp use:0 L2 unkn L1 unkn
Int(port 5: hfc-8s.1-6) TE ptmp use:0 L2 unkn L1 unkn
Int(port 6: hfc-8s.1-7) TE ptmp use:0 L2 unkn L1 unkn
Int(port 7: hfc-8s.1- TE ptmp use:0 L2 unkn L1 unkn

and any leds no up to green

My cable is 3456 to 3456. no connected from first to second channel i the same card (NT-TE).

How do it to work ???? because now seems like not working



Please Help

hello:
have you read the wiki for mISDN v2? please read that before doing, the URL:
http://wiki.openvox.cn/index.php/OpenVox_B400P_User_Manual_for_mISDN_V2

Yes I was read this many times. but when I try install wtih straight instruction then when I will try compile mISDN then:


/usr/src/mISDN# make
make all-recursive
make[1]: Entering directory `/usr/src/mISDN'
Making all in standalone
make[2]: Entering directory `/usr/src/mISDN/standalone'
make[2]: *** No rule to make target `all'. Stop.
make[2]: Leaving directory `/usr/src/mISDN/standalone'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/src/mISDN'
make: *** [all] Error 2



I can only comipile like:
make modules
make modules-install
./std2kern

but only when I not change hfcmulti.c
If I will changed that file I have another error like:


/usr/src/mISDN/standalone/drivers/isdn/hardware/mISDN/hfcmulti.c: In function 'hfcmulti_init':
/usr/src/mISDN/standalone/drivers/isdn/hardware/mISDN/hfcmulti.c:5207: error: 'struct hfc_multi' has no member named 'dslot'
/usr/src/mISDN/standalone/drivers/isdn/hardware/mISDN/hfcmulti.c:5212: error: 'struct hfc_multi' has no member named 'dslot'
/usr/src/mISDN/standalone/drivers/isdn/hardware/mISDN/hfcmulti.c:5216: error: 'struct hfc_multi' has no member named 'dslot'
make[4]: *** [/usr/src/mISDN/standalone/drivers/isdn/hardware/mISDN/hfcmulti.o] Error 1
make[3]: *** [_module_/usr/src/mISDN/standalone/drivers/isdn/hardware/mISDN] Error 2
make[3]: Leaving directory `/usr/src/linux-2.6.29.6'
make[2]: *** [modules_] Error 2
make[2]: Leaving directory `/usr/src/mISDN/standalone'
make[1]: *** [modules] Error 2
make[1]: Leaving directory `/usr/src/mISDN/standalone

i] Last edited by grzegorz at 2010-5-14 18:32 [/i

Ok I was sloved the problem with dahdi.

I applied patch from: http://www.openvox.cn/bbs/viewthread.php?tid=992

And now I can use card in NT mode.

Now Is the last to do a lookup cable to connect my NT port with TE port o the same card to test that working.

Anyone know how must see cable to connect this ???

Regard

Grzegorz